Doug Berch

Dulcimer Maker And Musician

cropped Dulcimer Builders and Makers 1 23

Month: September 2014

Music I’d Like To Hear #81

Music I'd Like To Hear #81

What’s On The Bench – 9/9/2014

I’ve started work on a few custom dulcimers and took a few photographs of one in the early stages of construction.

Sawing dulcimer sides to length

Once the sides are bent to shape I trim the to length using a bench hook and saw. It may be time for me to make a new bench hook. This one has a lot of mileage on it!

Gluing in the kerfing

The sides are glued to end-blocks and kerfing is glued in place. The kerfing stiffens the sides and provides a larger surface for gluing on the soundboard and back.

Planing kerfing flush with sides

When the glue has dried the clamps are removed and I plane the kerfing flush to the sides. Most of the planing is done with a 101 plane. The tiny 101 plane gets a lot of use in my shop. After planing the kerfing flush with the 101 i switch to a jack plane to true up the surfaces and assure everything that should be flat is indeed flat.

ome helpers working in the dulcimer shop

I found these guys hanging around on the lawn. I figured with hats like these they probably know something about woodworking and lutherie so I put them to work.

 

Doug Berch & Dulcimer Makers

Do NOT follow this link or you will be banned from the site!