Nothing original here, just an old trick that makes quick, quiet work of squaring and evenly thicknessing wood.
A few drops of super glue temporarily hold two wood runners to the bottom of a plane, in this case a Stanley #5 1/4 for those who care about such details. The plane can not take off wood below the height of the runners so repeatedly planing wood to the same height becomes easy. The top and bottom of the workpiece will also be parallel.
In the photograph I’m planing spruce brace stock for dulcimer backs. The rough brace sits on my planing beam; a flat and straight beam of oak with a bench stop at one end. I use this planing beam when truing and jointing fretboards and fingerboards, thinning bindings, and brace stock. I also use the planing beam as a caul when gluing fingerboards to fretboards.
Yes, it is a fascinating life I lead.